VESA support mount 27" 5k Dahua LM27-P501
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
it doesn't come with VESA mount support.I designed a VESA mount for this monitor. It's easy to print.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I bought a nice 27" 5K monitor, the Alhua Dahua LM27-P501, for a good price given its specs.
Unfortunately, it doesn't come with VESA mount support.
So I designed a VESA 100x100 and 70x70 mount for this monitor. It's easy to print and easy to modify.
Installation
Remove the left and right caps from the hinge.
Remove the screws and detach the monitor.
Place the printed part into the hinge.
Reinstall the screws from the original hinge.
Insert M5 nuts into the holes on the inside of the printed part.
Attach the VESA mount with M5×20 screws.
See screenshots in the main gallery.
Components:
M5x20 screws | 4x |
M5 nuts | 4x |
Print Settings
I printed it in PETG-CF and PET-CF for their strength. Other materials such as ABS should work well too; it's up to you to choose the right one. I think plain PETG would be more flexible, which is what I wanted to avoid.
Layer height | 0.2mm |
Walls | 6-8 and more (make it strength) |
Infill density | 40% |
Infill Pattern | Gyroid |
Support | No support needed |
Please share your 3D Prints. Thank you 🙏