O Cedar Floor Mop Replacement Handle Yoke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement yoke for the head of an O Cedar Floor Mop. My yoke which connects the handle to the head broke.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement yoke for the head of an O Cedar Floor Mop. My yoke which connects the handle to the head broke. This part is a snap in replacement.
https://www.amazon.com/Cedar-Hardwood-Microfiber-Telescoping-Handle/dp/B06XWJV9PN
You'll need to print with support for both the handle pocket and the head snap-in. I suggest for best strength to print in the orientation I provide the STL in. I printed mine in PLA at 80% fill which should make the part strong enough. Print in ABS If you want it even stronger. Once printed, clean out the supports and lubricate the part that snaps onto the head. If you can't get it to snap in, file a little bit of the slot until it will snap onto the mop head.
Print Settings
Printer:
HyperCube
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
80%
Filament:
HatchBox PLA
Category: Replacement Parts