1 / 2
DMS Omega Yoke with FHCS for Capra Headband
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remodel of the Capra yoke supporting the DMS Omega cups, utilizing flat head cap screws.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 87
- Wydruki
- 2
- Wyświetlenia
- 453
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega, which is a requirement if you are inserting brass inserts into the cups. This model also should allow for use of o-rings between the cups and yoke, as there is about .9mm between them.
