1 / 2
DMS Omega Yoke with FHCS for Capra Headband — image 1
1 / 2

DMS Omega Yoke with FHCS for Capra Headband

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remodel of the Capra yoke supporting the DMS Omega cups, utilizing flat head cap screws.

Rating
5 / 5
Likes
10
Downloads
87
Makes
2
Views
453
Reviews
1

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega, which is a requirement if you are inserting brass inserts into the cups. This model also should allow for use of o-rings between the cups and yoke, as there is about .9mm between them.