Capra Headband Yoke for Open Omega
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick remix of the Capra yoke for DMS' Open Omega project for increased stability.
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 836
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found the original spike-style cup attachment meant the ear cups frequently popped free of the headband when taking them on and off, so I combined the Satyr 3's screw-in attachment with the broader design of the Omega yokes. This is a quick and dirty design, I'll try to make a cleaner one soon.
Fits at least the Caprahead Band v3's static attachment arm, but should also fit the folding one based on dimensions; I just haven't had a chance to check. These will require M3 x 5 Voron-type inserts into the appropriate holes on the cup (middle on the front, top on the back of each earcup) and then either M3 x 8 mm or M3 x 12 mm screws to attach the sides of the yokes to the cups depending on your tolerances.
I prototyped this in PLA and then printed in both PETG HF and PETG Translucent; for what it's worth, the translucent fit best.