Liczymy pasujące modele…
Alternate grill for the Axial Capra. I wanted to add 2 additional lights to the front - kind of resembles a jumping spider. Printing Lenses: use clear PETG and concentric top layer. It will give it a fresnel lens effect.
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
This is a module for storing or displaying baseball caps. Standing or hanging ;) Print as many as you need for personal use. Se the included instruktions for printing etc.
Print from TPU; I used 95A. The original gave no advice for settings, but I found it worked well with 3 walls and 25% cubic infill. At first I printed it with 2 walls but the inner side wasn't rigid enough and got loose. Enable "Avoid…
I saw a few people complain about parts of the model being hard to print, I also found the default support settings in bambu studio made a mess of the cantilever pin the first time I printed it. This should make the model 'slap and…
I love my Audio-Technica ATH-A700 , but it's on its last legs, the plastic was basically disintegrating, but the drivers and closed back housing are still in good condition. I remixed the cup holders from the “Audio Technia Capra Headband…
Are you as ADHD as me? Cant sit still even when listening to music? Does your headphone cable brush against your shirt causing unwanted noise in your headphones? Well look no further! The Capra Audio Cable Springs might be the perfect…
when i was building my Capra audio Satyr 4s i wasn't able to order the recommended earpads from capra themselves, so i ordered HD600 compatible earpads that did not include the ring you're apparently supposed to steal from the old pads.…
Alternate grill for the Axial Capra. I wanted to add 2 additional lights to the front - kind of resembles a jumping spider. Printing Lenses: use clear PETG and concentric top layer. It will give it a fresnel lens effect.
Now much stronger and reliable with folding! BOM: 6x M3*10 FHSC bolts FHSC Screw Kit 6x M3 Voron Standard Heat-set Inserts M3 Threaded inserts TPU Band Material Polymaker 95a TPU Adjustment Arms and Pivot Blocks Material Polymaker PETG…
Use your Headamame with the Capra Headband V3! Folding! Comfort! Style! Use Voron M3 Heat-Set Inserts and M3 FHSC Screws! Affiliate Links if you want to support us further: Polymaker PLA Pro Polymaker PETG
You need little more space for the batery in your Capra? My Hardcase Ruddog Shorties were really tight with the stock piece. I made a lower one and its little bit longer. One problem is you cant install the ESC on the tray. I installed my…
As a longtime fan of the Fallout series, I wanted something cool for my Capra that matched the Fallout blue and yellow color scheme. I found the fantastic panel designs by Mh2241 , which I was able to get into Fusion and remix using other…
I finally made the mount I've been wanting to make for years - the "driver hanging out the window" perspective! This will fit basically all GoPros that stick to the “standard” GoPro shape, but I designed it to fit a Hero 7 Black, but with…
A yoke for attaching the Stax Lambda series headphones to Capra Audio Headband v2 . By my estimation from pictures, it should also be fully compatible with the v3 version of the headband, but I have not tested this. This should be…
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
The Capra Micro Headband (CMH) is our attempt at the most comfortable headband for the ultra-light category of On-Ear headphones like our very own Faunus 1 and Koss headphones such as the Porta Pro and the KSC75! Using 3mm wide Hairbands…
I found the original spike-style cup attachment meant the ear cups frequently popped free of the headband when taking them on and off, so I combined the Satyr 3's screw-in attachment with the broader design of the Omega yokes. This is a…
I made a mount for a leather strap to mount to the adjustment arm of the Capra headband v3. The mount has to holes to put an M3 heat set inserts into the screw plate then traps the leather strap. I printed a Capra strap out of PLA to use…
The original headband frame is made for 0.75mm thick metal headbands, however the ones I bought were 0.8mm thick which made it not possible to insert them. This model is effectively the same as the original except with an increased…
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
Simple yoke made for my Hifiman Ananda Stealth to use with the Capra Headband v3. To use with the stock screws from how the stock headband is secured, but you can use your own. Print with PETG. Link to the Capra Headband v3 made by Brian:
Print instructions on Orca Slicer: While holding shift, select both bodies, right click and press "Assemble". Change "strap new" to wall loops 1, rectilinear infill 20%, no top or bottom shell layers.
The Capra Headband is a modular headband system designed to work with various models of headphone. Since the inspiration of this headband was the Sennheiser 6x0 series headband the first supported system of this headband is the 6x0. You…
This is a module for storing or displaying baseball caps. Standing or hanging ;) Print as many as you need for personal use. Se the included instruktions for printing etc.
Print from TPU; I used 95A. The original gave no advice for settings, but I found it worked well with 3 walls and 25% cubic infill. At first I printed it with 2 walls but the inner side wasn't rigid enough and got loose. Enable "Avoid…
I saw a few people complain about parts of the model being hard to print, I also found the default support settings in bambu studio made a mess of the cantilever pin the first time I printed it. This should make the model 'slap and…
If you need help with printing? Have questions about the designs? Want to keep up with what we're prototyping? Join our discord https://discord.gg/fb4HdDvErF Additional Affiliate Links if you want to support us further: Polymaker 95a TPU…
Fostex Style yokes and arms for the capra headband to support a variety of circular cup sizes. These will work for the Satyr 3 for example, and any other headphones that use circular cups. - Requires one M4 15mm Interscrew/Furniture screw…
I love my Audio-Technica ATH-A700 , but it's on its last legs, the plastic was basically disintegrating, but the drivers and closed back housing are still in good condition. I remixed the cup holders from the “Audio Technia Capra Headband…
YT Capra MKIII External Brake Routing Conversion Kit About This Project This is a complete set of 3D printable mounts to convert the brake lines on a YT Capra MKIII mountain bike from internal to external routing. I originally designed…
Are you as ADHD as me? Cant sit still even when listening to music? Does your headphone cable brush against your shirt causing unwanted noise in your headphones? Well look no further! The Capra Audio Cable Springs might be the perfect…
This is a link riser for the rear upper links of an axial capra RC car. I found that the print orientation has a huge effect on the part's strength. PLA or PETG at 100% infill works well. EDIT: I added the fusion 360 file. I'm a complete…
when i was building my Capra audio Satyr 4s i wasn't able to order the recommended earpads from capra themselves, so i ordered HD600 compatible earpads that did not include the ring you're apparently supposed to steal from the old pads.…
This is the left yoke, mirror on the x axis in the slicer for the right yoke. This model is a modification of the New 3.5mm left yoke to let the headphones lay flat for easier storage, particularly in backpacks/narrow bags. Not perfect…
Added a 0.8mm wall internally near the top to avoid travel moves, thus decrease stringing. After I made it I found someone else had the same idea, but did it to the regular size band. Including it here in case you want the regular size.
If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
Axial Capra after market Integy Cage ESC/Receiver mount. ESC -Hobby wing quicrun crawler esc Receiver box- Traxxas TRA6724 Box i printed at .2mm layer height 20% infill printed on a sovol sv06 sent from 1967 EMD sw1500
Body panels for the Axial Capra. I designed them as two parts, so the inserts can be printed in a different color. You can even used two different colors for printing the insert to add more contrast :-) The hood is a two-piece design to…
This is a potentially universal solution for headband replacements, I am actively seeking out more headphones to adapt to this design. Right now the HD6x0 series of headphones, the Aurorus Borealis and Australis, and my original designs…
Bambulab X1C printer, BAMBULAB carbon filled PLA, 300mm/s, 232° Nozzle, 45° bed
You must disassemble the UTB18m to install these. I put wax on the screw before installing to help ease screwing into the plastic.
Designed for my Axial Capra after I broke the original. Works great for me, enjoy!
This model is intended to adapt the Capra Headband V2 with the AD500x, AD700x, AD900x, and Philphone, no confirmation on any other Audio Technica Headphones. To disassemble your AT headphone: -Remove the pads and then the 4 screws around…
Sennheiser Yoke Replacement
I use PLA(I was out of PETG) and 6 x 2mm drill bits cut down to 23.5 mm. Sharpened, nailed down in the holes and pressed down with a bench vice. Tested.
The stock grill for the Axial Capra looks to be inspired by a Toyota Land Cruiser. I made this grill to look closer to a Jeep 7 slot grill. Sorry, no angry eyes.
