"Easy Print" Pre-Supported Adjustment Arm For Capra v3 Headband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom supports for the adjustment arm
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw a few people complain about parts of the model being hard to print, I also found the default support settings in bambu studio made a mess of the cantilever pin the first time I printed it.
This should make the model 'slap and print', just check your slice first if you change the printer or settings (H2D by default). I made two versions, the first is for standard printers and has a 0.2mm gap between the part and the support. The other has no gap and instead has two layers painted in a second material type for use with a support material (PLA + PETG work well) (Multi-Material Printers or several manual swaps).
Note: Scene is intended to be opened in Bambu Studio or Orca Slicer. Don't just import the geometry, there are custom settings applied to the support mesh.