"Easy Print" Pre-Supported Adjustment Arm For Capra v3 Headband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom supports for the adjustment arm
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 166
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw a few people complain about parts of the model being hard to print, I also found the default support settings in bambu studio made a mess of the cantilever pin the first time I printed it.
This should make the model 'slap and print', just check your slice first if you change the printer or settings (H2D by default). I made two versions, the first is for standard printers and has a 0.2mm gap between the part and the support. The other has no gap and instead has two layers painted in a second material type for use with a support material (PLA + PETG work well) (Multi-Material Printers or several manual swaps).
Note: Scene is intended to be opened in Bambu Studio or Orca Slicer. Don't just import the geometry, there are custom settings applied to the support mesh.