Leather Strap Mount for Capra Headband V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a leather strap mount for the Capra headband V3. This mount attaches the same way the capra stap does.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a mount for a leather strap to mount to the adjustment arm of the Capra headband v3. The mount has to holes to put an M3 heat set inserts into the screw plate then traps the leather strap. I printed a Capra strap out of PLA to use as a template for the leather. I personally made mine about a ¼ inch shorter on each side. I purposefully made the holes offset and the mount reversable. I did this so when the leather starts to stretch, you could flip it to make it tighter. You also create new mounting holes in the leather, it is up to you.