Jabra C820s replacement yoke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement yoke for Jabra C820s headphones.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have two sets of Jabra C820s and some of the original plastic got really brittle. After using zip-ties and glue for some time, I finally decided to design yokes to replace the parts that were falling apart. The replacement yokes offer no adjustability, they were just designed to fit me :)
There is one part, which is needed four times, two of them mirrored.
The orientation in the amf-file is a bit strange. The screenshot shows how I printed them.
The halves are just glued together using CA glue.
I will recommend doing one side at a time.
NOTE: When the glue is applied, the yokes halves have to be assembled on the headphones. They can't be put on the headphones afterwards. Make a test fit without glue first!
NOTE: You will have to make some cuts in the original plastic in order to get it off the cable going across. I.e.: You can't fully reverse this “mod”.