Jabra C820s replacement yoke
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement yoke for Jabra C820s headphones.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have two sets of Jabra C820s and some of the original plastic got really brittle. After using zip-ties and glue for some time, I finally decided to design yokes to replace the parts that were falling apart. The replacement yokes offer no adjustability, they were just designed to fit me :)
There is one part, which is needed four times, two of them mirrored.
The orientation in the amf-file is a bit strange. The screenshot shows how I printed them.
The halves are just glued together using CA glue.
I will recommend doing one side at a time.
NOTE: When the glue is applied, the yokes halves have to be assembled on the headphones. They can't be put on the headphones afterwards. Make a test fit without glue first!
NOTE: You will have to make some cuts in the original plastic in order to get it off the cable going across. I.e.: You can't fully reverse this “mod”.