Cessna 172 Yoke MIP Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the grommet for the yoke control rod through the MIP and is sized for a honeycomb alpha lite control at 12mm dia
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I created this as part of my Cessna 172S MIP sim build. I disassembled a Honeycomb Alpha light to fit behind the MIP and extended the control rod (12mm dia) with a replacement from Amazon that was longer but had to make some rod adjustments to provide attachment to yoke mechanism and get the proper distance from the MIP. There was a grommet with the Honeycomb but it didnt look correct so I designed and built this one to fit an MIP that was 3/4" thick and look pretty authentic IMO.