1 / 1
Cessna 172 Yoke MIP Grommet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the grommet for the yoke control rod through the MIP and is sized for a honeycomb alpha lite control at 12mm dia
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I created this as part of my Cessna 172S MIP sim build. I disassembled a Honeycomb Alpha light to fit behind the MIP and extended the control rod (12mm dia) with a replacement from Amazon that was longer but had to make some rod adjustments to provide attachment to yoke mechanism and get the proper distance from the MIP. There was a grommet with the Honeycomb but it didnt look correct so I designed and built this one to fit an MIP that was 3/4" thick and look pretty authentic IMO.