Assembly part for IKEA STOCKSUND #117774
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The screw snaps of my Ikea armchair STOCKSUND were lost. So I designed and 3D Printed them
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 153
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The part has Ikea reference #117774 and you need 4
I know we can find them in any Ikea or from internet, But the nearest shop was too far and wanted to use the Prusa MK3S+ 3D printer we have at our Fab Lab. By doing like that we can also save some money, around 10€ in that case
I didn't reproduce the exact shape of the part but made a simple design (Right side in the picture below)
For printing, I used Prusament PLA Jet Black and printed with 3 perimeters and 25% Gyroid infill. Other parameters are the standard ones from PrusaSlicer
Part is printed horizontally for better strength and so needs supports
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d and.step files so you can modify the design and adapt it to your needs.
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes.
You can also look at other Ikea parts I designed and 3D printed
Enjoy
If you like this model, take a look also at my other designs in Printables.