K1C Screen 60 Degree Angle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1C/ K-Series Screen Angle Adapter slots onto the back of the screen to adjust the angle from 30 to 60 degrees.
- Ocena
- 4,75 / 5
- Polubienia
- 33
- Pobrania
- 176
- Wydruki
- 4
- Wyświetlenia
- 516
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ATTENTION: Please be extremely careful of the ribbon cable when taking off and replacing the screen.
K1C Screen Angle Adapter slots onto the back of the screen to adjust the angle from 30 to 60 degrees with no additional hardware or alteration to the cable & mounts.
The adapter is perfect for K1C printers that are stored lower down or on the ground, making viewing and use of the screen considerably easier.
Print settings:
Wall Loops- 2
Layer Height- 0.2mm
Infill Density- 10%
Supports- Auto, Tree
Material: PLA, ASB, PETG, ASA
Print Time: 15 Minutes
Please support my work by posting a make, review and any feedback.
Happy Printing :)