K1C Screen 60 Degree Angle Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K1C/ K-Series Screen Angle Adapter slots onto the back of the screen to adjust the angle from 30 to 60 degrees.
- Rating
- 4.75 / 5
- Likes
- 33
- Downloads
- 176
- Makes
- 4
- Views
- 516
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ATTENTION: Please be extremely careful of the ribbon cable when taking off and replacing the screen.
K1C Screen Angle Adapter slots onto the back of the screen to adjust the angle from 30 to 60 degrees with no additional hardware or alteration to the cable & mounts.
The adapter is perfect for K1C printers that are stored lower down or on the ground, making viewing and use of the screen considerably easier.
Print settings:
Wall Loops- 2
Layer Height- 0.2mm
Infill Density- 10%
Supports- Auto, Tree
Material: PLA, ASB, PETG, ASA
Print Time: 15 Minutes
Please support my work by posting a make, review and any feedback.
Happy Printing :)