P
PrintablesMathis
Rectangle de construction 2x4
Ceci sont des rectangle qui s'emboitent ressemblant au lego. Il sont petit et facile a transporter pour pouvoir faire des construction partout.
- Downloads
- 13
- Likes
- 2
- Rating
- 0
Search results: angle
Counting matching models…
P
Printables
Astro Bot - Lost Triangle/Triangle Perdu
Lost Triangle from Astro Bot PS5 game --- Triangle Perdu du jeu PS5 Astro Bot
P
Printables
NERF triangle foregrip (update: supportless)
you can print it upstraight. I haven't tried printing it yet though
P
Printables
CB mic mount for Jeep Wrangler JL
I was inspired by some aftermarket steel mike holder, but wanted to have a magnetic mount. The idea how to mount it was inspired by this AliExpress item . It is held in place by the grab-handle screw. I made it out of the Bambu PA6-CF -…
P
Printables
Angled Govee LED Light Strip Accent Lighting Mount With Holes for Securing Down
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
P
Printables
Multi-Angle Scratcher Stick
The Multi-Angle Scratch Stick offers a unique scratching experience with its sharp, multi-directional points that provid
P
Printables
Single Load Block for Angled Talon Magwell for Kirin
Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…
P
Printables
Slope Angle Factor Gauge
A Slope Angle Factor Gauge that attaches to a rifle and displays the Slope Angle Factor based on the elevation/depression angle of the firearm. It requires one (1) M4 nut, one (1) M4 washer, four (4) M6 nuts, four (4) M2x6 flat or pan…
P
Printables
Wrangler JK Tire carrier delete plug
These are 2007-2018 Wrangler JK tire carrier delete plugs. I designed it to fill the holes and to be really snug. Just print it upside down. I printed it with standard settings with PLA, but i think PETG will be better…
P
Printables
Wrangler JK License plate delete plug
2007-2018 Wrangler JK license plate delete plug. I have made 3 types: Plaint with no text, Rubicon and Recon versions. Let me know if you need something else. The font is not the exact jeep wrangler font, but its very very close. You can…
P
Printables
mk3 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c recessed
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
P
Printables
Qidi 4 Plus Tool Head with small triangle pattern
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
P
Printables
Qidi 4 Plus Tool Head with large triangle pattern
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes except for the face where there are different air options. You will need (2) 4x1.5mm round magnets available: here Glue to install…
P
Printables
Qidi 4 Plus Tool Head with Full triangle pattern
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes closed except for the Full face where there are different air options. I use this tool head currently. You will need (2) 4x1.5mm…
P
Printables
ANGLED LEGO Bricks
NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments
P
Printables
1/2 PEX bracket with 90 deg angle
Remix of existing brackets but I needed to attach in a spot where I couldn't get behind so had to move the screw hole 90
P
Printables
Squares See Through Bowl - Angled
Squares See-Through Bowl - Angled This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from A side angle, the intricate latticework reveals a…
P
Printables
Prusa XL Enclosure Door Opening Angle Limiter
Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.
P
Printables
Ender 3 Angled Filament Spool Holder: A Versatile Upgrade
Slides onto rails: Many 3D printers, including the Ender 3, have horizontal extrusion rails. A sliding spool holder utilizes these rails to move the spool holder along the length of the printer. 1 hole for anchor bolt: This hole is…
P
Printables
Model of angle sensor AA ROT 120
This is a 3 piece model of the angle sensor AA ROT 120 used in cars.
P
Printables
Multiple Angle Stand for iPadPro M5 & M4 11 inch 2024-25 with flexible case v2.0
Ce support très léger permet de maintenir l'iPadPro M4 11" (2024) and M5 11" (2025) AVEC une coque à “JETech Coque Clair pour iPad Pro 11 Pouces M4 (2024)” https://amzn.eu/d/hUI3W5y (12€) Les angles possibles sont 5°, 40° et 65° 5° idéal…
P
Printables
Angled coupling for the Sovol SH02 for M6 Bowden fitting
I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…
P
Printables
Feature rich angle bevel
Use case and features Use this angle bevel whenever you need to transfer an existing, unknown angle to a new working piece. It is ideal for laying tiles in a room with non-90° angles, doing woodwork or making any strangle formed pieces…
P
Printables
Rubber Band Triangle board game
The game is designed for at least 2 players (maximum is 4). In this game, the task is to stretch the rubber bands over 4 protrusions (no less, no more). The goal of stretching the rubber bands is to create a triangle between the rubber…
P
Printables
Caliper-Assisted Outside Angle Finder (Goniometer)
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
P
Printables
Angled Double 68x37mm Solar Cell Mount
This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…
P
Printables
Desiccant Canister - Triangle 35x235LG
Modification of Desiccant Container - Paper Storage Bag - Triangle tolarger dimensions from a request. Original design here: https://www.printables.com/model/38730-desiccant-container-paper-storage-bag-triangle Want to modify a design and…
P
Printables
Drill sharpener for Bosch angle grinder
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
P
Printables
Fidget Keychain (Hexagon/Quint/Quad/Triangle)
A fidget toy to always have at hand. Simply print it in less than 15 minutes and attach it to your key chain to always have it with you! Features Simple to print A cool-looking fidget toy Prints in less than 15 minutes No supports needed…
P
Printables
UppaBaby Vista Cup Bottle Holder fix angle
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
P
Printables
Angled Multi connect M12 battery holder
Hold 2 M12 batteries at an angle for easier removal on the multiboard system
P
Printables
Angled Paintbrush Rest with Drip Tray
Angled brush rest to keep water away from ferrule. Attached tray to catch drips.
P
Printables
Yavoth for СHС-PRO TriangleLab
!!!! ------- Incompatible with standard XY carriages Sovol SV08 ------- !!! Yavoth for СHС-PRO TriangleLab and Orbiter 2.0/2.5 , PCB Mounts for Stock PCB Sovol SV08, MGN12H Mounts You need to: CHC-Pro (for example) Radiator Triangle lab…
P
Printables
centring angle / Zentrierwinkel (90°/45°)
Centring angle for marking the centre or a 45 degree angle on round or square workpieces. There are two hexagonal holes on the underside for pressing in or gluing Ø7x1 magnets. Zentrierwinkel zum Anzeichnen der Mitte oder eines…
P
Printables
Battery Holder for General Tools ANGLE-IZER (#828)
A replacement battery holder for the General Tools ANGLE-IZER (#828) Digital Sliding T-Bevel & Protractor https://generaltools.com/angle-izer-digital-sliding-t-bevel-protractor-in-one
P
Printables
![TT SpaceMouse V2 - mounting for 4/8 MX Switch adapter [45 degree angle]](https://media.printables.com/media/prints/c17b23dc-4d91-42ab-b530-3f59bf4e5afd/images/9338696_b5b10274-5e00-4788-a390-84c0ce7ae1fc_02b600ec-7495-4f4e-bac0-cebd85aa2af0/render-test.png)
TT SpaceMouse V2 - mounting for 4/8 MX Switch adapter [45 degree angle]
Arduino code: https://github.com/AndunHH/spacemouse !!!buttons must be manually activated and set!!!
P
Printables
Ranglebox 30mm Tyre Hub - 3mm D shaft
Wheel hub for 30mm Ranglebox tyres . Compliant, designed to be printed out of TPU, I use the same hub with a gear fitting on my competitive Antweights (150g). Since moving to these we've had significantly less motor failures due to the…
P
Printables
BeamCase - Angled Handle with optional NATO rail
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
P
Printables
Logitech/Saitek Throttle Quadrant Angle Adapter
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
P
Printables
Led strip angled roof mount
Description Plastic holders for a led strip. They are meant to hold a wooden(or other material) bar that supports a LED strip which is facing upwards. I did not want direct light from LEDs because of the low ceiling. It is made for a bar…
P
Printables
Silly Shell Angled 4x Elite
Angles 4 elite dart chambers outwards and separates their chambers to reduce air leakage. Pinches darts so don't leave them loaded. Print with support on the inner separator. 5-21-25: added variant with a central supporting pillar to help…
P
Printables
CMF Phone (2 Pro) Triangle design
Elevate your device with this eye-catching CMF Phone 2 Pro case, featuring a sleek, futuristic design inspired by geometric aesthetics. Bold triangular patterns and sharp lines create a modern, tech-forward look while offering durable…
P
Printables
Anglerfish Skeleton Trophy - Fisherman Trophy
This anglerfish wall mount prints in two parts: the skeleton and the backplate. I printed the fish in translucent Carmine Red PETG and the plate in Bambu’s black basic PLA. After printing, I dry-brushed the wall mount to give it a…
P
Printables
Jeep Wrangler TJ (97-02) Front Upper Speaker Pods - 6.5"
I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could. I couldn't find anything like this (maybe that is for a…
P
Printables
Radius router jigs in different angles
I needed to route two legs for a piece of furniture I was building, and one was at a weird 97-degree angle, so I decided to create my own. I'm uploading the two jigs I needed, with a 50mm and a 25mm radius, in 90 and 97-degree angles.…
P
Printables
P-51 Mustang Angle Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
P
Printables
![[updated 7/2/2025] - 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer](https://media.printables.com/media/prints/cac66c3d-f414-4c7c-9eff-302ab8076bfa/images/10106236_a72997ff-098d-4c52-a1cf-433601146e4b_2621f605-70af-4e7a-8d89-c8767bd2ce10/cabin-air-plennum-original-foam-jeep-jk.jpg)
[updated 7/2/2025] - 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer
[updated 7/2/2025] 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer. Replaces the original open cell foam that sits between the cabin air filter housing (with the interior/exterior air flow actuator) and the duct leading to the…
P
Printables
Hama Star 75 tripod vertical angle tightener
Vertical angle tightener spare part for Hama Star 75 tripod (the one printed white in the photos). This part often breaks when tightened too firmly. I printed the part on MK3S+ with PETG 0,2 mm QUALITY with 4 perimeters and organic…
P
Printables
Corner mount for ZG-204ZM with angle
The ZG-204ZM sensor, which supports PIR and mmWave, includes a base with a ball joint that allows for angle adjustment. However, it can only be installed on flat surfaces, and the designs I found online allow corner mounting but sacrifice…
P
Printables
Lipo Battery Voltage Tester / Voltage Buzzer Angle block / Caddy / Lipo Alarm
. . . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and actively testing this model my Venmo is (Alex-Garza-48) Thanks !
P
Printables
Beauty triangle women stripe statute home decoration
Beauty women stripe statute home decoration Simple but elegant home decor with stripe pattern for your home or office. Doesn't need any supports, so very easy to print. If you like my work you can find other designs in my bio. And thank…
P
Printables
Raspberry Pi4 & Angled mount for Raspberry Pi GS or HD camera
Build a professional angled camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to securely…
P
Printables
Jeep Wrangler Horizontal Phone Holder up to 13.75 mm Thick
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro. It also fits my iPhone 16e. The brackets can hold a phone, with or without a case, up to 13.75mm thick and 149 mm tall. While I was…
P
Printables
cute angle
A AI generated cute angle. Errors are fixed. No textures. UPDATE: fixed hands; I removed the blobs between the hands and added this as an additional stl file. New pictures shows the changes in detail.
P
Printables
Lightweight RX light Printhead for all types of TRIANGLELAB style MOUNT
After successfully releasing my 2-in-1 printhead and receiving many requests for a single-extruder version compatible with Trianglelab-mount hotends , I decided to design and share this upgraded printhead with you. This lightweight,…
P
Printables
KBDCraft Adam Keypad Angle Kit
Angle kit to raise the KBDCraft Adam keypad and keyboard. Mounts on the bottom of the base plate.
P
Printables
Gamesir G8 plus right angle charger holder
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
P
Printables
Lovesac Compatible Cup Holder w/ Wood Texture (Angled and Standard Side)
Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…
P
Printables
Angle Adaptor / Winkeladapter
To read an outside thermometer from inside I had to mount it in an angle
P
Printables
Mind Magic - triangle peg puzzle replacement peg
Lost a few of the pegs for the Mind Magic triangle puzzle, so here is a model to print a few replacement pegs.
P
Printables
F-22 Raptor Angle Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
P
Printables
Wrangler JK sound bar speaker adapter.
Jeep JK Speaker adapter for speakers with larger magnets 3/28/26 Added .step File
P
Printables
Strong Angle Bracket 30° - 45°- 90° - M6 - 1/4x20mm Slots
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
P
Printables
2007-2017? Jeep Wrangler Duck Mount Shelf
*************I have a 2015 Wrangler Sahara Unlimited. I know it will work with other year Jeep Wranglers, but I don't know which. I know that many 3rd party add-ons say that they fit somewhere between 2007-2017. See the pictures of my…
P
Printables
Meade ETX-90 Finder Scope Angled Sidemount
One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…
P
Printables
Multi-angle Tablet stand
Made for 7mm tablets, this one will be used for Galaxy Tab A9+. Needed something to have angles for viewing and using. Printed with Elegoo Rapid PLA+, 3 perimeters, 15% Infill at around 400mm/s without issue. Holds great and has good…
P
Printables
TRUE RC X2 AIR variable angle adapter for HD ZERO analog module
You can put a spring (extruder P1S Spring) between the PEGT Washer and the patch part. M3 screw and bolt to complete the build. Original HDZero rail adapter : https://www.thingiverse.com/thing:5621199
P
Printables
Angled feet for folding clothes airer
After the old feet on our clothes airer wore through and it started scratching the floor and leaving rust stains, I designed new feet that are correctly angled to sit flat on the floor.
P
Printables
Angled desktop stand
I’ve designed a holder for a 5 mm thick plate, positioned at a slight backward angle for optimal support or display. The underside features three recessed cavities fitted for 8 mm rubber pads to protect the surface beneath. Additionally,…
P
Printables
Phone Stand (No AMS/MMU) - Lower Angle
The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed No MMU or AMS is needed for dual-color print. Printed with 0.6mm (0.4mm also works) nozzle. 2…
P
Printables
Yarn Tangle stop spinner
Designed after my wife asked me to make something she saw on social media. Works best with a drawer liner affixed to the bottom to prevent slipping. The top is made to have a 3x6mm magnet inserted to keep it in place. Added an updated…
P
Printables
QIDI Plus4 Tangle Sensor Tool | Third Hand
I needed a third hand to hold the tangle sensor tube while I depressed the PTFE holder with one hand and inserted the tube securely with the other. Printed in PETG for flexible strength. Used the Plus4 Strength profile. Added a 8mm brim…
P
Printables
Lens Flipper with Angle Indicators
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
P
Printables
Swamp Strangler Terrain - The Eightpints The Mire
Here's the hard truth about the Mire: even the plants are bastards. You'll see these things, a tangle of vines and thorns. You'll think, 'I'll just walk around it.' Then the tangle will stand up. A Bog-Strangler isn't a complex predator.…
P
Printables
F1 Ferrari SF-24 Angle Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
P
Printables
Qidi Plus 4 Angled Spool Holder Adapter for TPU Top Loading
I didn't like other angled spool holder options for TPU. The other models used way too much filament and were overly complicated. This prints in 45 min with ~23g of filament and works great with the original qidi spool holder parts. No…
P
Printables
B2V/Voron mounted to back of extrusion Z bracket for use with 2020 internal angle supports
widened the bracket holes to fit better and allow it to be directly screwed into the angle bracket (such as these https://www.aliexpress.com/item/32707599936.html). Also removed the MGN slot. My frame had lots of space so the rail just…
P
Printables
Diameter gauges 2-30mm & 31-45mm (1mm increments) with opening angle of 45°, 60°, 75°, 90° & 135°
Disclaimer: If you print this a fdm 3D printer (which you probably will) it might not be so accurate, especially for the smaller semi circles. Also, I don't recommend printing this with a material that has a lot of thermal expansion (such…
P
Printables
Betafpv C03 Camera Canopy - Fixed Angle
A 30° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
P
Printables
Star-spangled Christmas tree
Unveil the true spirit of the holidays with our dazzling tree-shaped ornament infused with a cosmic constellation of stars . This is more than a decoration — it’s a micro-universe of winter magic , transforming any space into a realm of…
P
Printables
Universal wide angle viewfinder V1 (large FOV, large image)
Could not find any easy to use, easy to make, cheap and compact viewfinder to use with Fat Shot 617 - Medium format 6x17 modular panoramic film camera so I made my own. It uses optics from a widely avaliable " wide angle 0.45x smartphone…
P
Printables
Don't get your Tinsel in a Tangle sign
100x160mm sign, reading "Don't get your tinsel in a tangle" with art of a Christmas tree Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit…
P
Printables
Cat tangled in Christmas lights
This ornament can be printed flat with an ams or filament changes at certain layers. if printing by doing filament changes follow these heights: start with black @ 1.2mm change to white @ 1.6mm change to red @ 2.0mm change to green @…
P
Printables
X-Shot Longshot angled Foregrip - Heatset Inserts
The hole is 3.7mm wide by 4.6mm deep. Make sure your inserts are about 1mm wider than the hole (so there's plastic to grip) and not as deep.
P
Printables
UniFi UA-G2-PRO UA-G3-PRO Faceplate 30 and 45 degrees Angle
Ubiquity Unifi Door Access UA-G2-PRO UA-G3-PRO 30 and 45 degrees Angle. picture are of the 45 deegress was for the ver1.0 where the mounting holes are a bit off and Wall mounting was too big (used radius instead of diameter). should be…