1 / 6
Saitek X52 Pro Hotas Ikea Poäng Holder — zdjęcie 1
1 / 6

Saitek X52 Pro Hotas Ikea Poäng Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair.

Ocena
0 / 5
Polubienia
9
Pobrania
47
Wydruki
0
Wyświetlenia
600
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair. Mounted with standard M5 screws and nuts - two for each hinge and three for each clamp - and with two holes for a zip-tie to organize the cables neatly.

The Stick and Throttle are mounted with the locks where the suction cups would normally go, so each one of them is locked to the base plate in four places for a sturdy mount.

Print with 3 perimeters and at least 1mm bottom and top shells. For the large parts, the only support needed is the one from the build plate (i.e. not in the horizontal drill holes). For the locks, you should either print them in PET or Nylon (for they have great layer adhesion) or turn them 90° so the "T" shape is flat on the print bed (for additional strength). The locks need support in any orientation you'll print them in.

Tagi