Saitek X52 Pro Hotas Ikea Poäng Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 47
- Makes
- 0
- Views
- 600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair. Mounted with standard M5 screws and nuts - two for each hinge and three for each clamp - and with two holes for a zip-tie to organize the cables neatly.
The Stick and Throttle are mounted with the locks where the suction cups would normally go, so each one of them is locked to the base plate in four places for a sturdy mount.
Print with 3 perimeters and at least 1mm bottom and top shells. For the large parts, the only support needed is the one from the build plate (i.e. not in the horizontal drill holes). For the locks, you should either print them in PET or Nylon (for they have great layer adhesion) or turn them 90° so the "T" shape is flat on the print bed (for additional strength). The locks need support in any orientation you'll print them in.