Suspension fork cage mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts (clamps) for the suspension fork to mount a cage or rack. They have been long-time tested with ~ a 1 kg load.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
This is a mount for suspension forks for MTB. Designed for mounting cages, drybags, and racks on the suspension forks. Ideal for bikepacking outdoor adventures on MTB where extra carrying capacity is needed. They have been long-time tested during my last bikepacking adventures, where I made ~ 300 km in total with ~ a 1 kg load (printed with PETG 250C).
Key features:
- Easy to print: design is adopted for the best 3D printing experience
- 2 versions for forks with fork lowers 42mm & 40 mm diameter
Material recommendations:
For this specific model, I would recommend using PETG or ABS/ASA, because these materials offer good impact resistance, weather durability, which are essential for outdoor use. As I wrote in the beginning, I've printed mine with PETG, but I had metal clamps as a spare in case of breakage.
Use a simple navigation table to guide you through the material selection for Fthe DM 3D printer:
Printing settings recommendations:
1. Use the highest optimal nozzle temperature to reach the maximum possible layer adhesion.
2. Use > 80% infill percentage, for areas where the nuts are placed - better to use a modifier and increase the infill percentage up to 100%.
Assembling steps and BOM:
For assembling 1 mount, you need to use the following non-printed parts:
2 x M5 nuts
1 x M5x10mm screw
1 x M5x25mm screw
