1 / 4
Ikea IVAR Türkeilhalter Door Wedge Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on Holder for IKEA Ivar to store a door wedge
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds a door wedge when not in use.
The holder snaps/ clamps around the Ivar column (43.6 x 31.8mm) and has a very tight fit. So it wont slide down by itself.
The holder has the same angle on the inside as the wedge (8.5 deg).
My door wedge has a 8.5 deg incline and is 32mm wide.
No supports needed, print upside down (as in the file).