1 / 3
Exhaust for air Conditioning unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an holder for the hot air exhaust of an Hantech Local Air Conditioning unit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Description
This mount allows the hot air exhaust of an air-con to be vented outside through an wall.
This particular design is for an Hantech Local Air Conditioning unit.
This design also includes a grating to prevent any animals from entering through the hole in the wall.
Needed Material
- 1x Holder
- 2x Rail
- 6x 3,5x10mm self tapping flat-head screws
Printing Instructions
- Print the holder with the grating down
- Print the rails standing up to increase strength
Building Instructions
- Mount the rails with the screws onto the side
- Mount the assembly onto the hole in the wall with 5mm countersunk screws
- Insert the exhaust tube from the top
Additional Information
This part was designed with Onshape.
You can also check out my Thingiverse page: https://www.thingiverse.com/a14x/designs