1 / 3
Exhaust for air Conditioning unit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an holder for the hot air exhaust of an Hantech Local Air Conditioning unit.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Description
This mount allows the hot air exhaust of an air-con to be vented outside through an wall.
This particular design is for an Hantech Local Air Conditioning unit.
This design also includes a grating to prevent any animals from entering through the hole in the wall.
Needed Material
- 1x Holder
- 2x Rail
- 6x 3,5x10mm self tapping flat-head screws
Printing Instructions
- Print the holder with the grating down
- Print the rails standing up to increase strength
Building Instructions
- Mount the rails with the screws onto the side
- Mount the assembly onto the hole in the wall with 5mm countersunk screws
- Insert the exhaust tube from the top
Additional Information
This part was designed with Onshape.
You can also check out my Thingiverse page: https://www.thingiverse.com/a14x/designs