1 / 5
Slim XIAO nRF52840 & Wio-SX1262 Kit Case — zdjęcie 1
1 / 5

Slim XIAO nRF52840 & Wio-SX1262 Kit Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim case for a XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo

Ocena
5 / 5
Polubienia
33
Pobrania
146
Wydruki
3
Wyświetlenia
2419
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo. 

To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.

Parts list:

  • XIAO nRF52840 & Wio-SX1262 Kit (female pin headers removed on the WIO Board and directly soldered to the XIAO
  • 50x60x7mm LiPo Battery
  • SMA Pigtail
  • 7mm latching button (SHOU HAN 7-7 ZS or similar)
  • (optional) 35mm piezo buzzer
  • Small piece of transparent filament

Note that directly connecting the buzzer to the XIAO is probably not a good idea. There should be enough room near the SMA Pigtail to fit some protection/drive circuitry.

Tagi