1 / 5
Slim XIAO nRF52840 & Wio-SX1262 Kit Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim case for a XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 148
- Makes
- 3
- Views
- 2,448
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo.
To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.
Parts list:
- XIAO nRF52840 & Wio-SX1262 Kit (female pin headers removed on the WIO Board and directly soldered to the XIAO
- 50x60x7mm LiPo Battery
- SMA Pigtail
- 7mm latching button (SHOU HAN 7-7 ZS or similar)
- (optional) 35mm piezo buzzer
- Small piece of transparent filament
Note that directly connecting the buzzer to the XIAO is probably not a good idea. There should be enough room near the SMA Pigtail to fit some protection/drive circuitry.