Y-Back_Plate with added Y-Motor-support Bearing for PRUSA MINI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
support the Y-Motorshaft.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 591
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Y-Back_Plate with added support Bearing for PRUSA MINI
with this Part its possible to tension the y-Belt more ,
without bending the Y-Motor Shaft and get less Ringing on X .
this remix based on
MINI-y-plate-rear (R7) by ORIGINAL PRUSA MINI
parts need :
1pcs Bearing 625zz (16x5x5)
3x M3x25
4x M4x16 (re use from MK3 Y-Motor-Mount)
Recommended material: PETG or ABS/ASA.
Print with 3 perimeters and at least 30% infill.
for clean screw holes switch "support on Build-plate” on..
and paint support on the Support-Bearing-hole Top (see Picture)
look for the small Bearing :-)
fit´s for x-Support
https://www.prusaprinters.org/prints/135131-x-support-bearing-for-prusa-mini
Print orientation :
Flat on the Print-bed ;-)