Y-Back_Plate with added Y-Motor-support Bearing for PRUSA MINI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
support the Y-Motorshaft.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 1
- Views
- 591
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Y-Back_Plate with added support Bearing for PRUSA MINI
with this Part its possible to tension the y-Belt more ,
without bending the Y-Motor Shaft and get less Ringing on X .
this remix based on
MINI-y-plate-rear (R7) by ORIGINAL PRUSA MINI
parts need :
1pcs Bearing 625zz (16x5x5)
3x M3x25
4x M4x16 (re use from MK3 Y-Motor-Mount)
Recommended material: PETG or ABS/ASA.
Print with 3 perimeters and at least 30% infill.
for clean screw holes switch "support on Build-plate” on..
and paint support on the Support-Bearing-hole Top (see Picture)
look for the small Bearing :-)
fit´s for x-Support
https://www.prusaprinters.org/prints/135131-x-support-bearing-for-prusa-mini
Print orientation :
Flat on the Print-bed ;-)