Corner radius jigs - Radius from 5 to 120mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mix of all the good ideas from router jigs gathered on the internet, for what could be the ultimate radius jigs !
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 538
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two router jigs (a small and a big one), that are both a mix of all the good ideas from other router jigs gathered on the internet, for what could be the ultimate radius jig !
- Normal base : from 5 to 60mm radius
- BIG base : from 5 to 120mm radius
- BIG base that you can print in two parts (as inspired by @eponra) for smaller printer.
Edit :
For the BIG base that you can print in two parts :
The part 1 is always the same but the part 2 is exported with different tolerances ( 0, 0.1, 0.2, 03, 0.4mm).
- You can print the test_tolerance - part_A, and the try the test_tolerance - part_B - 0,*mm.
- The part A stay the same.
Features :
- Minimal filament use for printing the replaceable radius
- Compatible with guide rails clamp
- Easy to print and no support
- Back handle
- Fusion 360 files with radius parameter to create your own personalized radius
- Reenforced stops with m4 bolt
- Looks like some funny character's face :)
Don't hesitate to ask if you have any question about the !