Corner radius jigs - Radius from 5 to 120mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mix of all the good ideas from router jigs gathered on the internet, for what could be the ultimate radius jigs !
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 124
- Makes
- 1
- Views
- 538
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two router jigs (a small and a big one), that are both a mix of all the good ideas from other router jigs gathered on the internet, for what could be the ultimate radius jig !
- Normal base : from 5 to 60mm radius
- BIG base : from 5 to 120mm radius
- BIG base that you can print in two parts (as inspired by @eponra) for smaller printer.
Edit :
For the BIG base that you can print in two parts :
The part 1 is always the same but the part 2 is exported with different tolerances ( 0, 0.1, 0.2, 03, 0.4mm).
- You can print the test_tolerance - part_A, and the try the test_tolerance - part_B - 0,*mm.
- The part A stay the same.
Features :
- Minimal filament use for printing the replaceable radius
- Compatible with guide rails clamp
- Easy to print and no support
- Back handle
- Fusion 360 files with radius parameter to create your own personalized radius
- Reenforced stops with m4 bolt
- Looks like some funny character's face :)
Don't hesitate to ask if you have any question about the !