Voron Bowden Top Pass Through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Voron mod to pass through the bowden tube, trough the top Cover. Suitable for Tridend and 2.4 all sizes, & similar
- Ocena
- 5 / 5
- Polubienia
- 211
- Pobrania
- 954
- Wydruki
- 4
- Wyświetlenia
- 6111
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a bowden pass through for the bowedentube on Voron printers.
I have a 350mm sized voron and It bugged me that the spool is so far in the back.
putting a hole in the side panel to pass throug the bowden was no potion because this would have robbed me some hight because of the cable drag chain.
So I designed a piece thats passes the bowden throug the top of the printer.
This allowed me to put the filament spool in the front (and to the right) for easier access, while still maintaing full printing hight.
Sopport structure already included in the file. (0.2mm gap)
No need for suppoorts for printing
Update 08.03.2022 - Added .stl's with a 0,3 & 0,4 gap