1 / 2
Micron Purge Bucket with Silicone Nozzle Park
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Kyle's purge bucket mod. I added a nozzle park section similar to Esoterical's park for a Trident
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
I need a place to park my nozzle and I like Kyle's purge bucket for Microns. I also use and like Esoterical's silicone nozzle park on my Trident. So, I combined the two.
Additional BOM: Silicone band of some sort. I used a silicon band from a Galaxy Watch 5 I had laying around.
Instructions:
- Print the appropiate base and brush holder from Kyle's project. Do not print [a]_Bucket_x1.stl.
- Print my purge bucket with nozzle park.
- Assemble per the directions/pictures on Kyle's Github.
- Cut a piece of silicone from whatever source you are using. The length of the silicone piece is dependent on your specific nozzle setup.
- Bend and insert silicone into the holder.