Liczymy pasujące modele…
Vertical desk holder designed for Sakura Micron pens. Holds 24 across two tiers. Also Rotring Tikky, though they stick out a little higher. Holes are 11mm wide so anything else with a barrel that size ought to work. Print Settings Printer…
FT EMS version available here Move your PSU from bottom electronics bay to the back of the printer. Need panel and foam tape with 3mm thickness. The parts will squish the foam tape by 0.2mm. Hardware: Meanwell LRS-350 (LRS-200 also works…
BOM: 2X Sourcing map Lock Nut PG7 Type: PG7 Single Hole Cable Range: 3mm to 6.5mm / 0.12" to 0.26" Thread Diameter Cable Sleeve of your choice UPDATE: unchained up V2.stl ( thicker Wall ) -------------- 22.05.26
Ultimate Pen Organizer for Micron Pigma & Copic Multiliner – Perfect Fit Keep your creative workspace organised and your favourite pens at your fingertips! Whether you are an illustrator, architect, or bullet journal enthusiast, you know…
Voron micron+ JST junction box for LED lights. Fits snuggly in the extrusion. please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models
Simple mount for your micron 180 to use a btt sfs v2.0
RepRapMicron is the next small thing in 3D printing, brought to you by The RepRap Project. The idea is to create a micron-accurate 3D printer than uses common, cheap parts, and that can be built by the average 3D printer or CNC…
Micron is a compact, CoreXY 3D printer inspired by the Voron 2.4, redesigned from the ground up using 1515 aluminum extrusions and Nema14 steppers. This open-source printer supports 120×120mm and 180×180mm build volumes, offering reliable…
Top hat for the micron + 180. Camera mounting, and handle holes.
Add a couple of Revo Voron Nozzle Holders For Micron R1 to keep your nozzles handy. You can use the same twist pins as the R1 panel clips for this mount. Use the same settings that you used for the panel clips during the build. I printed…
A precision stepping mechanism that can be controlled by a 3D printer or CNC controller. With a 400-step stepper motor, it can attain an accuracy of better than 1 micron. Full construction details and links to source code are here:…
These parts attach to a RepRapMicron Axis Driver to turn it into a Z Axis with a print head. The print head allows deposition of UV resin in 10μm or finer droplets, or subtractive fabrication and manipulation with a stouter probe tip,…
Objektivdeckel zum Aufstecken für das Leica Summicron 50mm f2. Der Innendurchmesser berücksichtigt eine Auskleidung mit DC-fix Velour, dieses klemmt den Deckel. Der äußere Umfang ist leicht konisch, damit man ihn besser abziehen kann.…
A quick mod to the micron's z-chain mount, changing from vertical to horizontal. The bottom of the chain is simply mounted to the 1515 bed mount.
I didn't have any 5.25" drive bay covers for my Amiga 4000 Micronik Tower, so I made my own. Printed with Prusa Core One, PLA Prusament Vanilla White (not a perfect color match, but good enough for me), 0.4 HF Nozle, 0.25 mm layer height,…
I made this model to have the same advantages of a stealthburner on a smaller printer, like a Voron 0.2 or a Micron. The hole in the model is for the wires of an inductive probe, if you were to use one. I am going to design another…
PIKA P rint I n-place K inematic A ssembly This 3D printer makes things so small you literally need a microscope. Actually two microscopes because 3D. It is perfectly functional, but there has not been a lot of research in this area, so…
According to the Micron R1 CAD, the distance from the front of the bed to the back of the extrusion should be 23 mm. Photo courtesy of @xx_maverick_xx on Discord
You will need an M3x12. You may be able to get away with an M3x13 and two extra nuts on the back, and some cable sleeve to keep all the wires together. I used a ziptie to keep the sleeve at the box where the wires come out, and one at the…
Created these insert panels with hex pattern and micron logo because I didn't feel like buying acrylic panels for my top. I think these looks better than acrylic, lets see how they perform thermally though. I also lined the inside of…
This is a mod for the Micron Printers for Ants R1. The Powge 60T pulleys don't fit the stock Z drives, these do. NOTE: Dont forget to update the gear ratio in your configs! The stock micron configs assume 62 teeth. Changes: Screws moved…
Mounts a 4010 blower fan to a 1515 extrusion. Mainly targeted at under the Micron printer bed. But could be used in other orientations as-needed. I never printed one of these, seems that it needs supports. BOM (simply modified to have one…
Add a keystone receptacle at this cover location - mainly useful for those who have G2Z and nothing behind this cover. Would be interesting to hear if someone with stock motors can use this at all. Designed from revision 0 of the Micron…
This little octopus waves his 8 little arms and flashes his 8 miniature eyes. His structure and body were made using 3d printed parts, a small motor, some LEDs, and a Smartibot robot controller to allow him to be remotely controlled.…
FT EMS version available here Move your PSU from bottom electronics bay to the back of the printer. Need panel and foam tape with 3mm thickness. The parts will squish the foam tape by 0.2mm. Hardware: Meanwell LRS-350 (LRS-200 also works…
remixed RapidBurner X Carriage MGN9H for Micron and Pandoras Box to include a mount for Cartographer or Beacon probe
Print this with voron settings. You can use a single color printer or a multi material printer. Pause just above the hole to switch to clear filament. Profit. Most up to date instructions here:…
For Beacon or Carto it is highly recommended to use a silicon wiper. This is my version Use a A1 wiper pad and glue it to the printed part. Secure everything with 2x M3x8 and some t-nuts. At the moment there is no bucket for the blobs.…
What you need: 4x M3x12 for mounting to MGN9H 2x M3x8 to connect both halfs 4x Heat Inserts 2x 2x10 self tapping screws for endstop Important! Do not overtighten the Beacon screws! or the layers will crack. Optional: You can print the 1mm…
Y tool had the wrong size for Micron 180mm but it was such a good tool compared to the other jigs because you just pushed it up against the extrusion to get the right length. I decided to duplicate it for the X and Z extrusion alignment,…
Quick print glasses for New Year's 2022! Remix Info Primary new thing here is the filament hinge inspired by one of the shutter shade remixes. The original openscad design was really good but the snap-fit arms were very fragile. I used…
Micron+ Front Camera Mount OV5648 3x M2 4mm - Scews Required
No Drop Nuts custom fit for the Micron R1 gantry. They make it so the gantry doesn't fall apart when you move it.
This is for me to transfer stl, but the lock mod really working for my 1515, thought may be some one will need this.
edit 08.11.2024: Added a case version compatible with both old and new PCB versions. The old version, which is only compatible with the old PCB version, was moved to the folder named 'old.' added 3mf for multicolor printing. deprecated:…
“Created By” is a series of logo plaques that celebrates the original creators of your favorite Film, TV, and Comic Book characters and storylines! The Micronauts, based on the Mego toy line, debuted in Micronauts #1, cover dated January,…
This is a “fixed” version of the Micron+ R1 XY joints that is compatible with the lightweight CNCed gantry options often found on Aliexpress. These CNCed gantries were designed for the original R0 XY joints, so because the new XY joints…
made a slight adjustment so the matchstick doesnt hit the z tensioners
Wanted extra ones because they are such a pain to pull out of a dirty filter to be put into a clean one.
BOM: 2X Sourcing map Lock Nut PG7 Type: PG7 Single Hole Cable Range: 3mm to 6.5mm / 0.12" to 0.26" Thread Diameter Cable Sleeve of your choice UPDATE: unchained up V2.stl ( thicker Wall ) -------------- 22.05.26
BOM: 10x M3 Washers 0,5mm thickness Left and Right overall 2mm washers for the Upper 2 Bearings (downside)
Pen holder for Sakura fine liners Printed on Crelity Halot one: 2mm wall 0% infill Be sure to make holes if hollow
M icron A ccurate U niversal S ystem- “Maus” Maus is a step by The RepRapMicron Project towards producing a 3D printer capable of fabricating 3D objects to micron precision. As it is hard to pick up parts smaller than a millimetre, it…
Botton part has a support structure in the STL. Should be removed, cleaned and covered with FoamTap. The rest should be clearly visible. The number of magnets and screws is optional. It depends on the holding strength you want. BoM: 16x…
This is a one piece side skirt for a micron+ r1 180. It connects all seperate parts and gives more stability to the skirt. Print using regular voron PIF settings.
I wanted some more stability in the printer. So I got MakerBeamXL 1515 triangular corners. These need special z covers. So here is the edited version for a Micron+ R1 180.
Mount your BTT Smart Filament Sensor (SFS) on your Micron twist lock corner clip! Print following usual Voron print settings
Designed to accommodate 1515 extrusions with 3mm panels with 3mm foam tape (as designed for the Micron+ R1. Print following Voron settings but recommended a higher infill percentage (say 70%+) and printing at 45º (as shown in the picture)…
A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…
Doom Micron mods by Doom Discord community https://github.com/DarthPope0327/DooMicron Base build parts should be gotten from the printers for ants github. https://github.com/PrintersForAnts/Micron These parts are for modifications to turn…
This is for fysetc peek bed spacer kit. you will have to cut your peek screws 2mm off. A total length of 16mm of treads. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in…
bed spacer holder for Formbot kits that uses the bakelite bed spacers. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other…
Made this hood since I couldn't find anything online, and didn't want to shell out 100€ for an original rubber one. It's the first version, for me it's quite tight so I may have to slightly reduce the diameter. I managed to screw it in…
Micron R1 minisb modified to accept nozzle leds. For example from Fysetc.
mirror the scrubber if you want it on the other side
Remixed to support a door with insulation foam applied to it, total thickness of 6mm
Simple add-on that adds a 625RS bearing on top of the motor shafts to add support. It reduces the bending effect on the shaft caused by the tension of the timing belt. In theory it can make the motor runs smoother under high belt tension…
Ultimate Pen Organizer for Micron Pigma & Copic Multiliner – Perfect Fit Keep your creative workspace organised and your favourite pens at your fingertips! Whether you are an illustrator, architect, or bullet journal enthusiast, you know…
The keystone was rotated to be horizontal to clear space with electronics. Note: I use the FT EMS mod for my Micron's electronics bay, so I can't guarantee that that this mod will work perfectly with the default electronics arrangement…
A cover to keep the back of your EBB36 more contained, and help avoid cables catching on other things.
Quick connect for your micron bed for 1515 extrusions. 2 pin jst connectors x2 2 pin wagos x3 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Micron+ center 5015 blower bed fan. m3x8 scews x2 m3 nuts x2 5015 blower fan x1 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Modified Micron's DIN rails mount into 6, 7 and 8mm variants. Helps accommodate rails that has been cut a bit shorter than desired, especially for those that cut them with hand saw. Meant for Micron, might work for Salad Fork and other…
Voron micron+ JST junction box for LED lights. Fits snuggly in the extrusion. please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models
Thicc skirts for the Micron 180 with a proper Colony Clacker door.
This mount I modeled after the R1 Skirts for other displays, but made a mount to fit the HDMI5 based on specs and feedback. Much thanks to mattd on the doom discord for testing this while my screen was stuck in shipping!
A quick mount to add a JST-XH splitter to a 1515 extrusion used in the Micron and V0. Its snap in so installing afterwards is no problem. For mounting the pcb is used 2x m3x6 bhcs which screw tight directly in the plastic. Not sure which…
I wanted to add an exhaust fan to my Micron+ R1 to keep the door closed when printing PLA or PETG, and instead of making a new hole on my panels, I figured I could try using a couple of smaller fans that would fit in the center piece…
Simple mount for your micron 180 to use a btt sfs v2.0
Had a Dragonburner laying around I wanted to mount on a Micron 180 with a Cartographer probe. Did not want to print Anthead since I do not want to open/break fans. Dragonburner “alternative mounts” did not seem to have a Cartographer…
I wanted a side switch for my r1 micron plus I'm building. I have the same switch on my trident and love it so i remixed a skirt piece to hold the switch. Here is a link for folks in the US for the switches used: link works as of 04/2025…
Basically shrinked version of DoubleT clamps For assemby 4 Voron spec heat inserts and 4 M3x12 screws needed Will add step files later
The 64T GT pulleys I had for my assembly had 25mm hubs so I modified the prints to fit. Must remove flanges from pulleys!
RepRapMicron is the next small thing in 3D printing, brought to you by The RepRap Project. The idea is to create a micron-accurate 3D printer than uses common, cheap parts, and that can be built by the average 3D printer or CNC…
Micron+ Crap catcher. right side has built in supports. its made to fit the newer 5015 bed fan style on the R1 micron+ but it can work without it. you can read about what this does here…
Sakura Pigma pens can be bought individually, with different tip sizes and colors to suit your needs. I needed a case to keep these pens organized, so I designed a simple and lightweight case available in three sizes: for 4, 6, and 8…
This is a modified version of the lower chain mount for a Micron R1 3D Printer. It allows you to mount the chain onto the rear section of the bed rail using a longer M3 screw into the same hole so the chain can be placed into the new…
Hacked this in Fusion 360 to replace the original battery cover I lost years ago. Modeled from pictures of the original. Not perfect but functional.
Tooless Panel Locks for 1515 Extrusions Edit: I modified the screw holes for better retention and strength. This should also help with alignment. M3 x 12 mm Socket Head Hex screws work perfectly for these.
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland Modeled after a similar rear cover I designed for the Voron Trident, this rear cover is for the Micron…
Micron is a compact, CoreXY 3D printer inspired by the Voron 2.4, redesigned from the ground up using 1515 aluminum extrusions and Nema14 steppers. This open-source printer supports 120×120mm and 180×180mm build volumes, offering reliable…
I printed Cosmonate's NoDropNuts for Micron R1 for my Micron and found them to be too tall for my Misumi extrusion. I used SkyKing83's Misumi 1515 No Drop Nut model as a size reference because I'd previously printed them for my bed…
Holders for Sakura Pigma Micron Fineline Pens: 6 pens (6x1 and 3x3),10 pens (10x1 and 5x5), and 12 pens (12x1 and 6x6).
I've intended to add the Revo PZ to my micron, due to the tiny footprint. The Fabreeko starter kit utilizes an MGN9C rail for the x axis, as opposed to the more common MGN9H rail used in other micron kits. Therefore, I needed a specific…
I need a place to park my nozzle and I like Kyle's purge bucket for Microns. I also use and like Esoterical's silicone nozzle park on my Trident. So, I combined the two. Additional BOM: Silicone band of some sort. I used a silicon band…
I was too lazy to measure the spacing of the bed extrusions so I made some spacers that help to align those extrusions. Print the larger one two times and the smaller ones four times. Slot the larger ones in the extrusion in the middle…
Just a really useful tool. For when you're building your Micron R1, it helps locate the MGN7 rails and the motor pulleys. The most up to date version can always be found on my github: https://github.com/Jadecky/Printer_Mods/tree/main
One of the less known works of the Cults of Mars decorating the "posh" residences of the upper class of the imperium. This Pilar is compatible with both WH40k and Kill Team terrain. It serves to obstruct LOS and provide greater cover.…
One of the less known works of the Cults of Mars decorating the "posh" residences of the upper class of the imperium. This Pilar is compatible with both WH40k and Kill Team terrain. It serves to obstruct LOS and provide greater cover.…
One of the less known works of the Cults of Mars decorating the "posh" residences of the upper class of the imperium. This Pilar is compatible with both WH40k and Kill Team terrain. It serves to obstruct LOS and provide greater cover.…
