1 / 8
Micron+ Smol Hex Skirts (With optional Keystone Rear Skirt)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skirts with smol hexes to match the smaller machine. Added 2x Keystones to the rear skirt.
- Ocena
- 4,333 / 5
- Polubienia
- 58
- Pobrania
- 174
- Wydruki
- 2
- Wyświetlenia
- 1248
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 2) (Komentarze: 10)Remiksy (1)Kolekcje (69)Powiązane
Whilst the Micron+ is an awesome little scaled down 2.4.. the skirt Hex's weren't scaled down enough and looked too big.
HartKs slotted Skirts are awesome, but no bestagons???
So I've created these for the Micron+ (Micron 120 in progress). More hexagons, in the relevant size.
We have:
- Fan Side Skirts A/B
- Fan Support, with the recess removed.
- Rear - Plain
- Rear - Dual Keystone (Requires new trim, or drill access holes in your current one)
- Rear - Dual Keystone Trim
- Front - Plain
- Front - Waveshare 4.3" Touchscreen
- Front - 3.5" Touchscreen
File orientations are probably all over the place. I'll adjust these as soon as I figure out how. For now, face down on the build plate as normal.
.step file included.
Update - 03-Aug-23
- "Smol_Hex_Front_Skirt_35_Touch_Screen".stl" was missing the holes for the heatset inserts that allow the trim to be mounted. These have now been added.
Update - 10-Aug-23
- Centralised the hex pattern on Smol_Hex_Front_Skirt_35_Touch_Screen.stl it was out by about 1.5mm