Voron Micron Nozzle Brush and Purge Bucket - Front Mounted - v2 Available!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a nice and simple nozzle brush and bucket model for the Micron with v2 now available so the bucket is removeable!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
v2 Now uploaded! using 4x 6x3mm magnets and a 3mm brass insert, you'll have an easier time removing the little purge bucket for cleaning as well as using the brass insert to clamp the brush into place :)
I've also included “longer” versions that will bring the bucket almost to the door for more purge volume
The brush holder should be support free, however the bucket will require supports.
---------------------------------------------------------------------------------------------------------------
There's nothing more satisfying than seeing your nozzle squeaky clean as it starts a print! So don't let your Micron miss out with this simple Nozzle Brush and Purge Bucket :)
I have mounted this model at the front of the printer as I figured it would be more accessible and easier to install/remove as I work on it.
I use KOMB from TmRxJD found here: https://github.com/TmRxJD/KOMB it has some fantastic functions and straight forward installation!