1 / 7
Micron+ R1 bucket with nozzle parking and silicone brush — zdjęcie 1
1 / 7

Micron+ R1 bucket with nozzle parking and silicone brush

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Micron+ R1 bucket with nozzle scrubber and parking that works great with the Blobifier mod.

Ocena
5 / 5
Polubienia
14
Pobrania
97
Wydruki
1
Wyświetlenia
385
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A mod of @KyleGB's great Micron+ Nozzle Scrubber & Purge bucket to better fit my Micron+ R1 build which includes other mods, like: 

  • Blobifier
  • Boop
  • Z-Umbilical

The original bucket design was a bit small for my taste and i wanted the nozzle scrubber to be closer to my Blobifier. To extend the bucket to the sides, I had to account for the design of my heat plate and flex plate. 

For this mod, you'll need:

  • 5x magnets (6x3mm)
  • 2x heatset inserts (Voron spec: 5od x 3id x 4h)
  • 9x M3x6 BHCS screws
  • 4x M3 nuts to mount to the bed rails 

See the exploded CAD view for assembly guides.

For the complete setup you see in the pictures, see my other mods:

For sample macros to be used only with this setup, refer to the original mod's macros (and adjust accordingly). 

If you use Happy Hare in conjunction with the Blobifier addon, you'll just need to adjust parameters to indicate positions for nozzle wiping and parking.

Tagi