1 / 7
Micron+ R1 bucket with nozzle parking and silicone brush — image 1
1 / 7

Micron+ R1 bucket with nozzle parking and silicone brush

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Micron+ R1 bucket with nozzle scrubber and parking that works great with the Blobifier mod.

Rating
5 / 5
Likes
14
Downloads
97
Makes
1
Views
385
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A mod of @KyleGB's great Micron+ Nozzle Scrubber & Purge bucket to better fit my Micron+ R1 build which includes other mods, like: 

  • Blobifier
  • Boop
  • Z-Umbilical

The original bucket design was a bit small for my taste and i wanted the nozzle scrubber to be closer to my Blobifier. To extend the bucket to the sides, I had to account for the design of my heat plate and flex plate. 

For this mod, you'll need:

  • 5x magnets (6x3mm)
  • 2x heatset inserts (Voron spec: 5od x 3id x 4h)
  • 9x M3x6 BHCS screws
  • 4x M3 nuts to mount to the bed rails 

See the exploded CAD view for assembly guides.

For the complete setup you see in the pictures, see my other mods:

For sample macros to be used only with this setup, refer to the original mod's macros (and adjust accordingly). 

If you use Happy Hare in conjunction with the Blobifier addon, you'll just need to adjust parameters to indicate positions for nozzle wiping and parking.

Tags