Micron Rear Cover with PUG and PTFE passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Micron cover with both PUG and PTFE passthrough.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland
Modeled after a similar rear cover I designed for the Voron Trident, this rear cover is for the Micron R1. There are two versions of the accent piece, one has the Micron Logo as a separate part and the other has the logo as part of the piece.
Use the standard Voron settings. 40% infill, 4 perimeters, 5 top/bottom layers. ABS or ASA.
Assembly is identical to the Micron original and uses the same hardware including a M10 PTFE coupler for the rear. You will also need to add 2 more heatsets and 2 M3xx BHCS for the PUG holder.