Micron Rear Cover with PUG and PTFE passthrough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Micron cover with both PUG and PTFE passthrough.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 41
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland
Modeled after a similar rear cover I designed for the Voron Trident, this rear cover is for the Micron R1. There are two versions of the accent piece, one has the Micron Logo as a separate part and the other has the logo as part of the piece.
Use the standard Voron settings. 40% infill, 4 perimeters, 5 top/bottom layers. ABS or ASA.
Assembly is identical to the Micron original and uses the same hardware including a M10 PTFE coupler for the rear. You will also need to add 2 more heatsets and 2 M3xx BHCS for the PUG holder.