Pipe lamp with hidden compartment "Hidden Ember"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple pipe lamp with a hidden compartment, fast easy print
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pipe style lamp I am calling “Hidden Ember”, it uses a printed pipe reducer as the base. It has a hidden compartment in the base that can be used as a stash or to add weights to make the lamp heaver. This uses a cheap replacement lamp socket that can be found at almost every hardware store or online (links below).
Can be printed using PLA, but I recommend PETG or better (I used PLA).
The lampshade resembles a large mason jar and is comparable with a real wide mouth mason jar. I have included 3 “jars”, a short wide, tall wide, and a tall slim. In the photos, I am using an RGB bulb with a remote. Tall wide is seen in the photos.
Print with 3 walls, supports are only needed for the base but can be avoided if you turn on “make overhangs printable” and use a modifier to protect the power cord hole.
For the lampshade / mason jar, I use 2 walls and 5% gyroid infill. The lamp socket holder goes flat side down.
Affiliate links to the parts I used.
RGB Bulb: https://amzn.to/3Gh8L7e
Lamp Cord with Switch: https://amzn.to/3GEakfm
Light Socket: https://amzn.to/3GDCTJV