Pipe lamp with hidden compartment "Hidden Ember"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple pipe lamp with a hidden compartment, fast easy print
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 29
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pipe style lamp I am calling “Hidden Ember”, it uses a printed pipe reducer as the base. It has a hidden compartment in the base that can be used as a stash or to add weights to make the lamp heaver. This uses a cheap replacement lamp socket that can be found at almost every hardware store or online (links below).
Can be printed using PLA, but I recommend PETG or better (I used PLA).
The lampshade resembles a large mason jar and is comparable with a real wide mouth mason jar. I have included 3 “jars”, a short wide, tall wide, and a tall slim. In the photos, I am using an RGB bulb with a remote. Tall wide is seen in the photos.
Print with 3 walls, supports are only needed for the base but can be avoided if you turn on “make overhangs printable” and use a modifier to protect the power cord hole.
For the lampshade / mason jar, I use 2 walls and 5% gyroid infill. The lamp socket holder goes flat side down.
Affiliate links to the parts I used.
RGB Bulb: https://amzn.to/3Gh8L7e
Lamp Cord with Switch: https://amzn.to/3GEakfm
Light Socket: https://amzn.to/3GDCTJV