1 / 2
Panasonic Lumix GH4 GH5 eye piece cover / cup — zdjęcie 1
1 / 2

Panasonic Lumix GH4 GH5 eye piece cover / cup

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lumix GH4 GH5 compatible eye piece cover / eye cup for the finder

Ocena
0 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

My Lumix GH4 was missing the eye piece and I mostly use finder when shooting. I wanted to have something that blocks most light and protects the finder lens from dirt/grease.

 

Model consists of three pieces:

Eye Piece - this is mandatory. Print in PLA or PETG. This slides over the locking mechanism and locks in place. This piece slides in place with the open end down.

Lock Piece - Optional piece that keeps the bottom part of the Eye Piece locked tightly together. Use this if you don't plan to use the Soft Piece. This piece is so small that it is practically one time use only.

Soft Piece - Recommended. Print using TPU or other flexible filament. This slides over the Eye Piece (there is rail) and the bottom slides in place, locking the Eye Piece tightly in place. This blocks light and forces some distance between your eye and the finder lens. Make sure to slide it on so that the side without rail is towards the bottom of the Eye Piece. Slide from top down, then gently push the bottom part over the Eye Piece and the side rails fall into place.

Tagi