Bestway skimmer support oval pool adapter straight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Is your skimmer always drifting, angled and far away? Print this and forget about it! Skimmer support for oval steel bar
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 306
- Wydruki
- 2
- Wyświetlenia
- 1099
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Is your skimmer always drifting, angled and far away? Print this and forget about it!
This is a one-piece part, easy to print vertically, designed to adapt the Bestway skimmer support to Bestway’s oval steel bars.
On one side, the oval shape prevents the skimmer from drifting and keeps it straight. On the other side, the custom profile fits perfectly with the original screw brackets, holding it firmly in place.
NOTE: This is meant to be screwed onto the horizontal metal bar, NOT onto the liner.
Tested on a Bestway Steel Pro Max 14' x 48" (4.27m x 1.22m) from 2025.
Compatible with all Bestway pools that use these oval-shaped metal bars — but sizes may vary, so please measure yours before printing.
The required oval bar dimensions are approximately 2.24" (≈5.8 cm) x 1.48" (≈3.7 cm).
UPDATE 2: If the length (3.54" or 90 mm) of this model is too long for the space you have between your T connector and your liner, I’ve added two other files: 70 mm (2.76") and 80 mm (3.15").