Wire guard for HUE lightstrip plus (soldering)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a small wire guard for Philips HUE Lightstrip plus led strips, install after soddering a 6 pole wire in the strip.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What is it? It's a small guard case to install, after sodderíng on a 6 pole wire to a Phillips HUE lightstrip plus led strip. I ad shrink flex to the connection after, this should creat a connection that protect the sodder joints so they don't detach.
Added a right and left 90 degree angle guard, they a a bit longer and there can only be shrink flex up to the wire.
I print with a 0.25 nozzel and in petg, but that is a level of detail is probably not needed.
Top and bottom pieces are basically the same, just uploadet top and bottom, because that how I createt them, only difference i a bigger radius (1.2mm) on the sides of the top.