Cable Clip for Roland KSC-70 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friction-fit clips to hold cables from FP-30 piano to KSC-70 stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
While the KSC-70 stand for the FP-30 and FP-30X digital pianos comes with some sticky mounting pads for cable management, I wanted something that could be easily removed while not standing out too much. I also wanted to keep the cables close against the leg for a cleaner look. This clip is what I came up with. It's designed to slide over the back of the stand and has a section to hold the power adapter cable and the cable for the KPD-70 pedal unit.
The filament you use shouldn't matter much. PLA will work fine as long as the piano isn't in a very hot room. I recommend using at least three walls in the print for strength.