PVA (Polyvinyl Alcohol - fiberglass release agent) Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PVA (Polyvinyl Alcohol - fiberglass release agent) Bottle
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
PVA (Polyvinyl Alcohol - fiberglass release agent) Bottle to store liquid. I use this PVA liquid to glue stubborn filament to my build plate. I know others have used PVA (Polyvinyl acetate) glue, but this shares similar properties. Can be brushed on the build plate with silicone basting brush.
I designed an interlocking helix design on the outside of the bottle for ascetics and to help improve grip.
I designed my own threads for this. These threads are 8 threads per inch. They are also round or knuckle threads.
https://en.m.wikipedia.org/wiki/Knuckle_thread
PVA (Polyvinyl Alcohol - fiberglass release agent) used on my build plate for extra adhesion. Once cooled it releases easily. Will wash off with water.
I used a removable Silicone basting brush head from Amazon. Listed below.
AMAZON PVA (Polyvinyl Alcohol - fiberglass release agent)
AMAZON Silicone Basting Brush
Printed with 3D Fuel recycled PCTG filament.
https://www.3dfuel.com/products/refuel-recycled-pro-pctg-1-75mm?variant=50374402998588
My print setup…
Bottom Layers - 5
Top Layers - 5
Vertical Walls - 5
Infill - 25% Gyroid
Bed Temp - 85C
Nozzle Temp - 265C