1 / 1
Sovol SV06/SV06+ 50mm Spool adapter for Hatchbox3D
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Re-use original spool holder and bearings, but replace 30mm roller with 50mm roller suitable for Hatchbox3D 54mm ID
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This model replaces two parts on the original spool holder: the 30mm roller and the end-cap.
The benefit is that filament spools with larger center openings like Hatchbox (54mm) won't flop around as much.
Instructions:
- loosen the two M4 bolts holding the original assembly together
- remove end-caps
- remove roller, bearings and axle from original assembly
- move bearings and axle to new roller - fitment may be tight so use a hairdryer too soften the plastic slightly as needed
- replace end-cap that attaches to spool holder and secure with M4 screw
- slide new end-cap into place on other end and secure with other M4 screw
- place spool onto original metal holder
- adjust so that the “lip” is facing upward
- adjust M4 screw so that roller spins freely but has just a little resistance making it stop within a turn or two