Tighter Fitting Rewinding Spoolholder Mount for COREBOXX Premium.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the COREBOXX Premium spoolholder mount reduce wobbling of spoolholders.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 89
- Wydruki
- 3
- Wyświetlenia
- 578
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium.
I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's remix, I modified the mount to grip the spoolholder tighter and restrict movement.
Here are the changes made to the spoolholder mounts (aka spoolstations):
- Slot width on mount made 1 mm narrower.
- Slot side walls raised 5 mm higher.
- Mount position on bracket pushed back 5 mm, so the spools sit 5 mm farther back from the COREBOXX door. My far left and right spools would sometime brush against the front edge of the COREBOXX frame. This solves that issue.
- Omitted text labels from the base of the mount.
See the clips below for comparison of the original and tighter fitting versions:
Original vs Tighter Fitting Spoolholder Mount
Original Spoolholder Mount
Tighter Fitting Spoolholder Mount