Tighter Fitting Rewinding Spoolholder Mount for COREBOXX Premium.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the COREBOXX Premium spoolholder mount reduce wobbling of spoolholders.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 89
- Makes
- 3
- Views
- 578
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium.
I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's remix, I modified the mount to grip the spoolholder tighter and restrict movement.
Here are the changes made to the spoolholder mounts (aka spoolstations):
- Slot width on mount made 1 mm narrower.
- Slot side walls raised 5 mm higher.
- Mount position on bracket pushed back 5 mm, so the spools sit 5 mm farther back from the COREBOXX door. My far left and right spools would sometime brush against the front edge of the COREBOXX frame. This solves that issue.
- Omitted text labels from the base of the mount.
See the clips below for comparison of the original and tighter fitting versions:
Original vs Tighter Fitting Spoolholder Mount
Original Spoolholder Mount
Tighter Fitting Spoolholder Mount