Knob for Campingaz Lagoon gas cooker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for a Campingaz Lagoon gas cooker, in two flavors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement knob for the Campingaz Lagoon gas cooker, which I use when camping. May also fit on other Campingaz models - I'm not sure.
Included are both the original design (reverse engineered) and an FDM-friendly part which I suspect will break less easily when printed.
Advice: use a strong material suitable for outdoor use, such as ASA. PETG is possible as well, but is less resistant to UV. In addition, I recommend increasing the number of perimeters from the default of 2 to 3 or 4 as the central pin/axle of the cooker will exert quite some force on the part. A bit more infill (at least 25 %?) may also be a good idea.