1 / 1
Knob for Campingaz Lagoon gas cooker — image 1

Knob for Campingaz Lagoon gas cooker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement knob for a Campingaz Lagoon gas cooker, in two flavors.

Rating
0 / 5
Likes
2
Downloads
27
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A replacement knob for the Campingaz Lagoon gas cooker, which I use when camping. May also fit on other Campingaz models - I'm not sure.

Included are both the original design (reverse engineered) and an FDM-friendly part which I suspect will break less easily when printed.

Advice: use a strong material suitable for outdoor use, such as ASA. PETG is possible as well, but is less resistant to UV. In addition, I recommend increasing the number of perimeters from the default of 2 to 3 or 4 as the central pin/axle of the cooker will exert quite some force on the part. A bit more infill (at least 25 %?) may also be a good idea.

Tags